Home Site Map Contact Us 中文版

World leading MEMS wafer foundry for MEMS sensor, MEMS actuator and MEMS technology.

APM is a pure-play MEMS foundry founded in 2001. It has accumulated extensive manufacturing experiences in MEMS sensors, MEMS actuators and micro structures, and has large MEMS production capacity. APM owns a 27,000 square foot 6-inch MEMS fab with a broad range of MEMS fabrication capabilities and process platforms. APM, having high manufacturing flexibility, accommodates the very different MEMS devices in its facility, and realizes them through development to production with short cycle time. We provide foundry services to customers from startups to large companies in automotive, consumer electronics, telecommunication, industrial, and life science industry.


 
HomeAbout APMManagement Team

Management Team

 

Mr. K. H. Jao
President
 
 
Mr. Jao has over 20 years of experiences in semiconductor and MEMS industry.  He joined APM in 2001 to set up the automated MEMS facility, and was managing the process integration team for the development of MEMS production technology.  He has been in charged of Foundry Service Division and  MEMS manufacturing since 2007.  Mr. Jao holds a Master degree in electrical engineering from the National Taiwan University in Taiwan.
 

Dr. Jerwei Hsieh
Vice President
 
 
Dr. Hsieh received his PhD degree at National Tsing-Hua University, and conducted his postdoctoral research as a visiting scholar at Stanford University. He is now in charge of APM’s R&D activities and new technology development, as well as handling customer’s new product to production. Dr. Hsieh holds a dozen of patents and has published over 30 peer-reviewed papers. He had been served as the Steering Committee of IEEE Transducers conference, Tutorial Chair of IEEE Sensors Conference, and TPC of several international conferences. He is also the reviewer of Sensors & Actuators A, IEEE Sensors Journal, APEX, and JJAP.

 

 

Dr. Star(Ruey-Shing) Huang
Senior Consultant

Dr. Huang was one of co-founders and served several years as CTO of APM. Currently he acts as Senior Consultant of the company and brings over 45 years of experience in semiconductor and MEMS processing technology. Prior to joining APM, he was a professor of National Tsing Hua University in Hsinchu, Taiwan and had also lectured at University of New South Wales in Sydney Australia. Dr. Huang has published numerous papers and holds several patents. In addition, he worked to promote MEMS industrial technology in Taiwan and served a consultant of ITRI’s MEMS projects. Also, he joined initiating MEMS program in National Science Council in Taiwan and served as an initial program manager with the effort to actively promote the activities of academic fundamental research and development.  

 

 

Jason (C.H.) Wu, PhD. 
Technical Marketing 
Director 

Jason is responsible for Technical Marketing at APM and has over 20 years of experience in microfabrication technology, MEMS design & device development.  Prior to joining APM, Jason has served as technical & business development roles in various MEMS development companies in the US. Most recently, Jason is responsible for technical oversight and success of the development of infrared sensor arrays.  Jason received his MS and PhD in Materials Science & Engineering from Case Western Reserve University and an MBA from Cleveland State University. He holds several US patents and has authored over 20 journal & conference papers.

 
 
 Board of Directors

 

 

Mr. T. J. Tseng

Chairman of the board
 
Mr. Tseng is also the chairman of Unimicron Corporation, the largest PCB substrate company in the world.  In 2007, Unimicron Corporation became a major share holder of APM, and transformed it into one of the world's largest independent MEMS foundries.  Before Unimicron, Mr. Tseng served as senior vice president in United Microelectronics Corporation (UMC) and was the chairman of Taiwan Printed Circuit Association.  Mr. Tseng holds a master degree in physics from the National Tsing Hua University in Taiwan and was elected as the distinguished alumnus of the National Tsing Hua University in 2009.
 
 
 
Dr. M. S. Lin
Founder & Honorary Chairman
 
In addition to APM's Honorary Chairman, Dr. Lin is currently the chairman of MEMS Committee in Semi Taiwan.  Prior to APM, he was the executive vice president at Industrial Technology Research Institute (ITRI) in Taiwan, and the professor & chairman in electrical engineering department at National Tsing Hua University.  He has also been invited as the Member of Science and Technology Consulting Committee in Taiwan's Presidential Office.  Dr. Lin received his PhD degree in electrical engineering from the National Osaka University in Japan.
 
 
 
Mr. K. H. Jao
President
 
Mr. Jao has over 20 years of experiences in semiconductor and MEMS industry.  He joined APM in 2001 to set up the automated MEMS facility, and was managing the process integration team for the development of MEMS production technology.  He has been in charged of Foundry Service Division and  MEMS manufacturing since 2007.  Mr. Jao holds a Master degree in electrical engineering from the National Taiwan University in Taiwan.
 
 
About APMFoundry ServicesQualityNewsCareersContact Us 01625115 people visited.
Copyright © 2014 Asia Pacific Microsystems, Inc. TEL: +886-3-666-1188 EMAIL: sales@apmsinc.com

No. 2, R&D Road 6, Science-Based Industrial Park, Hsinchu, Taiwan